*$100 Credit
*credit applies to the Beam Mounts only
Beam Mounts for the Big Blue Bike Lift and Original Red Beam Mounts are suited to any road going bike that has a duplex frame (twin chassis rails) slung below either side of the engine. In particular Harley Davidson’s, the wide variety of Japanese Custom Bikes and many of the Classics which are still in regular use. Beam Mounting brackets are designed to take full advantage of the wide-based twin chassis frame layout to offer you a rock-solid method of raising these special bikes

PLEASE READ THE MAIN INSTRUCTIONS BEFORE COMMENCING, THEN REFER TO THIS SUPPLEMENT.
ADJUST THE BEAMS TO THE REQUIRED POSITION FOR YOUR MACHINE (Z – Z)
WHEN IN POSITION LOCK THE FOUR M8 BOLTS FOR MAXIMUM STABILITY.
LOCATE THE TWO HOOK BOLTS OVER THE FRAME OF THE MACHINE AND SECURE.
REFERENCE TO MAIN LIFTING ARM.
THE BEAM MOUNTS HAVE BEEN DESIGNED TO FIT IN ANY COMBINATION OF POSITIONS TO SUIT YOUR NEEDS. (SEE BELOW).

Used with the Big Blue Lift ONLY. Even the massive Can-Am Spyder can be lifted with the Easy Rizer Big Blue Lift. Whether your cleaning, servicing or repairing your Can-Am Spyder you can raise your machine to work bench height safely and securely with your Big Blue.

Ducati Mounts Original Red Only This mounting has been designed specifically for use with Ducati’s Complete Bracket Set

These mounts are the Swiss army knife of mounts. They were designed to lift virtually all motorcycles, whether it’s a V-twin, parallel twin, triple, or four. The rear mount brackets support the motorcycle under the foot peg pivot pin castings.

FREE Mounts of your choice
When you purchase an EAZY Rizer Lift
Footpeg Mounts for the Big Blue Bike Lift and Original Red These mounts are the swiss army knife of mounts they were designed to lift virtually all motorcycles regardless of age. Whether its a v-twin, parallel twin, triple, or four, these mounts work! Available in standard and heavy duty types.

Frame Mounts for the Big Blue Bike Lift and Original RedThese mountings have been designed for applications where it is not possible to lift the bike by employing the normal ‘beam’ method in pairs, due to obstructions or uneven surfaces such as the exhaust system or crankcase falling below the frame line of the bike.

These mountings have been designed for applications where it is not possible to lift the bike by employing the normal ‘beams’ method in pairs, due to obstructions or uneven surfaces such as the exhaust system or crankcase falling below the frame line of the bike. They can be fitted on the front or rear beam mount to support the bike, typically by the legs of the raised centre stand or the engine crankcase.This is done usually in pairs and can be individually adjusted to differing heights to suit the contour of the engine casing. A set comprises of two mountings complete with ‘U’ bolts that secure the bike frame but can also be used without these providing an alternative form of stabilising is employed. For example, by the beam mount ‘J’ bolts or quality ‘ratchet type’ strapping. This design allows for mountings in many different ways and has a range of-height extension from (zero to 5in)
Please note: The diagram below shows four mountings this is for illustration Only.

This mounting has been designed specifically for use with the Valkyrie and must be used in conjunction with the Beam Mounting kit.

Multi Mounts for the Original Red Only When using Multi-Mounts to lift v-twin engined bikes you may choose to opt for our V-Twin variant which uses an alternative top element for the front lifting bracket; this enables you to support the bike via the cylinder barrel as opposed to cradling the collector pipes.

V-Twin/Sports/Super Bike Mounts for the Original Red Only This mounting has been designed specifically for use with V-Twins Complete Bracket Set

V-Twin Multi-Mounts When using Multi-Mounts to lift v-twin engined bikes you may choose to opt for our V-Twin variant which uses an alternative top element for the front lifting bracket; this enables you to support the bike via the cylinder barrel as opposed to cradling the collector pipes. Both the front and rear lifting brackets of our Multi-Mount system are made up of two parts; the lower of the two is essentially a box section which you slip onto the main lifting beam, the top half is specifically designed to suit the region of the bike being supported.
The V-Twin top element of the front bracket allows you to position it just under the exhaust manifold as it exits the cylinder barrel, thus the barrel takes the weight of the front portion of the machine.
You could purchase the top element of the front bracket separately and use it in conjunction with the standard Multi-Mount system (they are inter-changeable). If you are unsure as to the best course of action you can contact our technical advice department by phone or email, or you can complete the online order form as best you can, mentioning your query in the Comments Box – we will then contact you prior to processing your order to determine the best option given your particular circumstances. If you own more than one machine (or you intend replacing your bike soon) we will be happy to help you find the best way forward

Wheel Mounts for the *Big Blue Bike Lift and Original Red The two ‘hoop’shaped Wheel Mounting brackets are able to slide in and out of the main lifting arm, thus allowing you to individually adjust each bracket to achieve the correct fitment *”Eazy Rizer Big Blue” is designed for chassis lifting.Wheel mounts can only be used on a mixed and match basis.